Pipe Cutting and beveling Machine:
The series machine is ideal for all types of pipe cutting,
beveling, and end preparation. The split frame design allows the
machine to split in half at the frame and mount around the OD of
the in-line pipe or fittings for strong, stable clamping. The
equipment performs precision in-line cut or simultaneous cut/bevel,
single point, counterbore and flange facing operations, as well as
weld end preparation on open ended pipe, ranging from 3/4” to 56”
O.D.(DN20-1400mm), on most wall thicknesses and material.
| Features(Pneumatic pipe cutting beveling machine) |
- Split Frame
- Aluminium Frame, light weight
- Cold Cutting/Beveling improve safety
- Cut or Cut/Bevel simultaneous
- Low Axial & Radial Clearance
- Tool feed automatically
- Easy install & Operation
- Pneumatic, Electric and Hydraulic type for option
- Machining OD of pipe from 3/4” up to 56”
New improvement(Pneumatic pipe cutting beveling machine)
1. Middle locking of rotation ring.
Previous the locking screw at the side, the improved new ones, it
is in the middle, this make the locking more symmetry and stable.
And the space for loosing screw is bigger than before, when split
the ring, more convenient.
2. Uncovered locking screw of stationary ring
It's difficult to assemble the split frame on the pipeline when 2
locking screws at the side. The new uncovered design makes the
installation easy and user friendly, especially when install the
split frame on pipeline.
| Specification(Pneumatic pipe cutting beveling machine) |
- Driven options: Pneumatic, Hydraulic or Electric
- Air requirement: 1500L-3000L/Min@0.6/0.7Mpa
- Hydraulic requirement: 2-60L/Min@12.5Mpa
- Electric requirement: 220-240V 1PH 50/60HZ
- Feed mode: Star wheel, automatically
- Feed rate: Fixed@0.08mm per circle
- Packaging: Plywood case
| Selection Guide(Pneumatic pipe cutting beveling machine) |
| Model | Working Range (OD) | d (mm) | D(mm) | L (mm) |
| Inch | mm | Steel body | Aluminum body |
| 168 | 2”-6” | 50-168 | 185 | 512 | 178 | 192 |
| 230 | 2”-8” | 50-230 | 236 | 564 | 178 | 192 |
| 275 | 5”-10” | 125-275 | 283 | 612 | 178 | 192 |
| 325 | 6”-12” | 168-325 | 334 | 665 | 178 | 192 |
| 377 | 8”-14” | 219-377 | 386 | 719 | 178 | 192 |
| 426 | 10”-16” | 273-426 | 438 | 776 | 180 | 195 |
| 457 | 12”-18” | 300-457 | 469 | 807 | 180 | 195 |
| 508 | 14”-20” | 355-508 | 518 | 862 | 190 | 195 |
| 560 | 16”-22” | 400-560 | 570 | 910 | 190 | 195 |
| 610 | 18”-24” | 457-610 | 618 | 960 | 190 | 195 |
| 660 | 20”-26” | 508-660 | 670 | 1020 | 190 | 195 |
| 715 | 22”-28” | 550-715 | 719 | 1084 | 190 | 198 |
| 762 | 24”-30” | 600-762 | 770 | 1134 | 190 | 198 |
| 830 | 26”-32” | 660-813 | 830 | 1194 | 192 | 207 |
| 914 | 30”-36” | 762-914 | 924 | 1296 | 212 | 214 |
| 1066 | 36”-42” | 914-1066 | 1077 | 1468 | 212 | 216 |
| 1230 | 42”-48” | 1066-1230 | 1248 | 1646 | 212 | 216 |
Suggest: size 1066 and above size select and use hydraulic type
| Typical Buttwelding Joint(Pneumatic pipe cutting beveling machine) |
Suggest: if any other welding seam or special demand, please better
to advise us before you place the order.
Before you place order to us, please let us know the following
information:
Choose the right size
Advise us the driven options: Pneumatic, Electric or Hydraulic
Advise us the body options: Steel body or Aluminum body
Confirm electric power supply ( Voltage, frequency and phase)
Confirm the beveling angel required
Confirm the welding joint required (U, V, Double V or Compound
preparation)
Advise your pipe material ( Carbon steel, stainless steel or
others)
Other special demands about machine
The spare parts needed
If the pipe wall thickness more than 30mm, inform us in advance
(Important)
After-sale Service
- Warranty period: 12 months(Electric motor 6 months)
- Emergency spare parts required dispatched within 24 hours
